Comments on: Excel conditional formatting formulas based on another cell

This tutorial explains how to use Excel formulas to format cells and entire rows based on the values you specify or based on another cell's value, and provides a handful of formula examples. Continue reading →

Comments page 22. Total comments: 1726

  1. Hi there is there a way to have one cell state a specific text if another cell is below a certain number?

  2. I have starting date in cell A5 and ending date in cell G5. I want all the dates between A5 and G5 including dates in cel A5 and G5 in some range.

    Please get me the formula for the same.

    Thank You !

  3. HI i need a conditional format to state in a cell a certain value if it is within a range.
    for example:
    1 to 100, the cell should show A
    101 to 200, the cell should show B
    201 to 300, cell = C
    and so on...

    also,
    i have this dilemma:
    a cell should show "O" if a value is within +/- tolerance; or should show "Y" if the value is = to the maximum tolerance; or should show "X", if the value doesn't meet the tolerance
    example:
    tolerance is +/- 0.5
    the cell should show "O" if value is any of the following: -0.4, -0.3, -0.2, -0.1, 0, 0.1, 0.2, 0.3, 0.4
    or
    the cell should show "Y" if teh value is exact to the tolerance, +0.5 or -0.5
    or
    the cell should show "X", if the value is less than -0.5, and greater than +0.5

    any help is highly appreciated..thanks!

  4. Hi,

    I want to format a cell into three different colors based on condition provided to different cell, let's say if value in cell 7 it is red.

    Kindly guide me.

  5. I'd like to make the font in a cell change to white (or disappear) when the content in the cell next to it is also in white font. How do I go about doing this please?

  6. Hello,

    I am trying to apply conditional rule to highlight my dates ranging from monday-sunday to highlight current week, How can I apply this rule?

  7. Hello,
    I have a spread sheet that tracks vehicle hours. In column B is the vehicle hours which are updated weekly. In column G is the last service hours. Starting at row 2 I would like G2 to be green when B2 is equal to or greater than G2 and less than G2+499, would like G2 to be orange when B2 is greater than G2+500 but less than G2+999 and would like G2 to be red when B2 is greater than G2+1000.
    Could you help me with the formular please as no mater what I try I can't seem to get it to work.
    Thanks

    1. Hello, Carl,

      you need to create the rules for conditional formatting that would apply to G2 (G:G if for the column). Try the following rules:
      For green:
      =AND(B2=G2,B2<(G2+499)) For orange: =B2>(G2+500)

      For red:
      =B2>(G2+1000)

      Hope this helps!

  8. I have a spreadsheet for work, in which i record correspondence. I have a column for "days open" (C) and a column for whether the sender is VIP (G). The non VIP letters have a deadline of 15 days, VIP letters have 15 days. I want the days open cells to be highlighted when VIP correspondence goes over 5 days open, and non VIP goes over 15 days. I'm using =IF(G2="Yes", C2>5, C2>15), but for some reason it is highlighting all cells regardless of value. I also have a conditional formatting rule for any cell reading "Closed" but i don't imagine it affects this.

  9. THANK FOR GIVING SUCH GOOD SERVICES I WANT TO FOLLOW BY USING MY EMAIL ACCOUNT

  10. Hi, I want to use conditional formatting to highlight a cell a particular colour dependant on whether other cells are filled in.

    To put into context, I use to spreadsheet as a checklist for traders:
    Trader Name - Risk Assessment Received - Hygiene Certificate etc..

    Then once I have checked the box to show I have received all the information I want the cell at the end of the row to turn green after all the cells in the range are shown to not be empty.

    I have achieved this for one row using a method listed here. However, I have several rows I want this to apply to and if I copy/paste or drag down it doesn't apply to formatting to the specific row, it just bases it on the first row.

    I hope this makes sense.

    1. Hi, Dom,
      Supposing your data ranges from A to H column, try this formula as a formatting rule:
      =COUNTIF($A2:$H2,"")=0

      where "=0" checks whether the cell is blank. Notice, that we use absolute references for columns and relative for rows (to apply the rule to the next rows of the same column). Also, keep in mind that the formatting rule may multiply itself, when you drag it to another cell. For more info: COUNTIF.

  11. Is there a way to highlight 'A-F' if 'B' has specific text in it? To happen infinitely, not solely on one column. Database purposes.

    1. To highlight 'A-F' according to the text in 'B' create a formatting rule. To do that, go to Home tab, Styles box, Conditional Formatting > New rule. Use a formula below there and apply the formatting to the range of columns that you wish to highlight
      =$B1="ENTER_THE_TEXT_TO_LOOK_FOR"

      This point of the topic will provide you with example pictures on how to create and edit the formatting.

  12. If the value is more than 2000 or equal to 2000 write 2000. same as if the value is less than 20 or equal to 20 than write 0 in excle sheet.I need help please.

  13. if the value is 2000 write 2000. I would like to work above condition in excle sheet(i am using excle 2010)

  14. I'd like to make a To Do calendar with the Format
    as a meaning of
    08-09 From 8 to 9 but I got 08-sept as a result
    09-10 From 9 to 10 but I got 09-Oct as a result

    Please help

  15. My question is: Can Excel automatically insert a column with information from one book into another. This would either push a column over to insert the data or put in the column at the end of the current data. So this would be on going adding a new column up to a total of approximately 20 columns. The other book would always copy over the same column. This may be some high level stuff. Thank you very much in advance for your help.

    Kindest Regards,
    Todd Haig

  16. This is a very helpful article, Thank you.
    I do have one question. I am trying to fill in a cell with text based on the text in another cell. For example if A1=Apple put Applesause in D5, but if A1=Orange then put Orangejuice in D5.

    I am not the best with formula's or conditional formatting, and am hoping someone can help me out.
    Thanks - Tia

    1. Hello Tia,
      place the following formula in D5:
      =IF(A1="Apple","Applesause",IF(A1="Orange","Orangejuice",""))
      Keep in mind, that if there's neither apple nor orange in A1, D5 will remain empty.

  17. What a great article - Thanks!
    I have solved a lot of my requirements from the information I have learned here. However I have one formatting problem that has got me stumped. I have a row of data that contains numbers in some cells and text in others. What I really want to be able to do is automatically highlight a cell if the number in it is larger that the previous number in that row bearing in mind that number might not be in the immediately previous cell. e.g A1 - 1000, B1 - 1000, C1 - 1100, D1 - 1100, E1 - "text", F1 - "text", G1 - 1200, H1 - 1200 In this example I would want C1 to be highlighted as well as G1. C1 because it is larger than B1 (the previous number in row and it is larger than it) and G1 because it is larger than D1, again the previous number in the row.
    Hopefully that (a) make sense and (b) someone can put me out of my misery.
    Thanks in advance - AJ.

    1. Hi AJ,
      I'm afraid it won't be possible, because you will need to construct a complicated array formula, and array formulas can't be used in conditional formatting.

  18. hi i would like to know about the method to put color for the cell or cell content based on another cell value. Can you help me

  19. This is a great article, and has really helped me out. I do have one question that I can't figure out though that I thought maybe someone could help me with. I have column D filled with project numbers, and column F with either "projected" of "revised". I'm trying to find a way to locate the duplicates in column D, and from there pick out the "projected" to hide (or highlight with white on white) since it is not valid after there is a revised.

    I have come up with:

    =AND($D1=$D2,$F2="projected")

    though this highlights the "revised" for some reason, and also misses a number of duplicates in column D.
    Any help would be GREATLY appreciated.
    Thanks!

  20. I am trying to format cells in a single column that are greater than a value for a single in the column. To describe better, I have a list of values in the column, all corresponding to people. I need to highlight those that out donated our Leader. So I can compare all the values in the column to a value of a single cell. So all cell values in the range/column will be compared to a single cell. I can't figure out how to have every value compare to the single cell. Below is what I have and I5 is the 'leader' value.

    =$I2>I5

    This doesn't work because as $I2 moves down the list, I5 turns to I6, etc.

    1. Hello Stuart,
      This happens because of relative references. To fix the cell you are comparing to, add dollar signs before the column as well as the row reference, i.e.:
      =I2>$I$5
      If you still have difficulties, please specify what range of cells you are comparing to I5.

  21. Hi! I am trying to create a spreadsheet to keep track of when physical cards would expire. I want the spreadsheet to auto fill yellow when the physical will expire in 30 days and auto fill red when it will expire in 7 days. I have done this in the past but it has been a while and I can't seem to remember the formula.

    Thanks!

  22. Conditional formatting: How can we apply conditional formatting in a column based on data from another column.

    Eg: I need to format rows in Column A based on data in the same row from Column B

    If the row in column B has text "I win", Column A should be highlighted green. In the same way I should e able to apply for the whole column A

    Thanks in advance

  23. HI! I'M TRYING TO FORMAT A WORK SHEET WHERE EVERY VALUE ENTERED IN COLUMN SAY L, SHOULD PRECEDED BY THE 'TRUE' TEXT IN COLUMN M.

    SO IF I ENTER ANY PERCENTAGE VALUE IN COLUMN L, I SHOULD GET THE VALUE TRUE IN THE CORRESPODING CELL IN COLUMN M. i tried data validation and conditional formatting,they both seem not to work

    PLEASE HELP,IT'S an urgent request.

    Thanks!

    1. Hi Kamo,

      You can use the IF function in column M that will check if the cell in column L is blank, e.g.:
      =IF($L1<>"","TRUE","")
      I hope this helps

  24. I want to write an equation for a column in which each value depends on the value before it. EX: if my equation is y=X+1 and the first number in my column is 1 then the next number should be 2 and then the one after should be 3 and so on

  25. Hello!

    I have a question and i would really appreciate an answer on this one.

    I have a cell (E7) which drops down and gives us 4 options. Next to that cell, i have a 52x18 table (F10:W61). The cells in this table show a particular value for each of the 4 options mentioned above. For instance:

    If i select "Availability" in the first cell, the F10 shows me 90%, G15 shows me 60% and so on.

    My objective is to set color ranges. I can achieve this for 1 set of values, by selecting "format only cells that contain", and inputing the range. The problem is, if i change the text value in E7, the rules stay the same, and i need the following rules.

    If i select first option of E7:
    from 0-75% -> Red
    from 75-90% -> orange
    from 90-100% -> Green
    If i select second option of E7:
    from 0-80% -> Red
    from 80-95% -> Orange
    from 95-100% -> green
    and so on. The rest i can do by myself. Thank you so much!!

  26. I'm not sure if you have answered something like this before but here goes... I have a cell that I want to highlight if the value on the next cell is not blank.
    for example:
    N2 has 3 but O2 is empty the conditional format will not do anything but if N2 has 3 and O2 is not blank the conditional format will highlight the whole row.
    This is the current formula: =IF($N2=3,1,0). this highlights all rows if N2=3 regardless if O2 is empty.

  27. hi
    i want to do conditional formatting to avoid duplication of entries or highlight entries which are duplicate using multiple columns criteria.
    e.g. i want to highlight column D with values in column A, B, C & D are repeated at the same time in the sheet somewhere else? Is it possible

    17-Feb-15 20 1 5
    17-Feb-15 16 2 4
    17-Feb-15 20 2 3
    17-Feb-15 20 1 5

    Now row 1 and row 4 all the entries are same. How can i highlight with the same set of entries are getting repeated in the sheet?

  28. If I want to change the colour of Column D based on the columns A/B/C having text of Y or N what is the best method. ie. YYY = Red NNN = Green, any other combination has amber?

    Thanks in advance

  29. Hi,
    i want to know when i am writing a column name (problem details) and another column name(result) so need when i put result onle(pass)thst's time problem details column is atowmatic highlighted in green such as
    Complaint Details Result

    Hard Disk Damage Solved
    Hard Disk Damage
    before putting solved complaint details column is red color.
    when i put solved in result column then complaint details column is turn into green color.
    please need your immediate response.

  30. I currently have a Conditional Formatting set up to color code the cell Green if DBSK is entered for the first time within a row. Although, if a second entry of DBSK is entered within the same row, I need that cell to turn Yellow and then if the same DBSK entry is made a 3rd time within the row, I need that cell to then turn red. What is the best way to go about coding this or conditional formatting it?

  31. High im new to excel and i was wondering if it would be possible to get column k to be highlighted when a row has data but nothing is entered in the k column. then when an entry is made in column k the highlight would be removed.

    for example lets say in row 5 i have in column A- NUMBER, column b- last name, column c- first name, column d- employee #,... and in column k is titled date approved.

    so the premise would be that k would be blank until i entered a date and if that could be highlighted when blank so that it can stand out and the highlight removed once a date has been entered. if you can help that would be great

  32. Hi, I am hoping that someone could help!

    I am trying to colour format rows depending of the information of two columns.

    Column E is limited to YES or NO
    Column F are years

    I want to add conditional formatting so:
    = YES and under or equal 30 go green
    = YES and over 30 go yellow
    = NO and under or equal 30 to blue

    I would appreciate any assistance you could offer.

    Thanks so much!
    Nuria

    1. Hi Nuria,

      You need to create a conditional formatting rule for each color using the AND function:
      1) =AND($E2="YES",$F2<=30) for green cells
      2) =AND($E2="YES",$F2>30) for yellow cells
      3) =AND($E2="NO",$F2<=30) for blue cells

      1. Hi Irina,

        Is that possible to paste that resulted cell to another excel without any condition in new excel.

        For Ex: Pasting the values to another excel.

  33. Hi, I have dataset,as below, how can I write formulae which will output a Y into column B if there is a "Y" present in column A? Is it possible to extend this also for further similar conditions? Thanks

    A B
    1 XXZ1 N
    2 XYX2 Y
    3 ZSD3 N

    1. Hi Aaron,

      You can use the combination of ISNUMBER and SEARCH functions to look for specific text within your cells:
      =IF(ISNUMBER(SEARCH("Y",$A1)),"Y","N")

  34. Hi, I wanted to know if it was possible to highlight a number of cells based on the value to the left column. For example, I type in the value 1, and 1 cell to the right of that value is filled in green, I type in the value 7, and the next 7 cells to the right of that value are filled green. Is this possible?

  35. I'm trying to do something that should be fairly easy, but I'm having trouble making it happen.

    Simplified: I have dropdown lists in C3 (Where did we go?). And the distance from home to the place gone in E3. The options for the dropdown list are stored in I3-I33 (Names of locations) with an associated value in J3-J33 (Distance traveled).

    What I would like is for E3-E36 to return the values in J3-J33 if the C3-C36 dropdown option is entered.

    C3-C36= Dropdown List
    E3-E36= Result from J3-J33
    I3-I33= Dropdown List options
    J3-J33= Distances for each option chosen

    So, if I choose "Grand Canyon" from C3s drop down, and it is located in I8, the distance of 2000 miles is listed in J8. I would like that value to show up in E3.

    I can make it work for one specific number but not for the entire list.

    "=IF(C4=I3:I33,J3:J33)" only returns the correct answer if C4=I4. I need it to return the value in the J3-33 cells.

    Thanks for any help,
    -Rob

    1. Hi Rob,

      The easiest way to go would be using the VLOOKUP function in column E:

      =VLOOKUP(C3,I3:J33,2,FALSE)

      If will match the value from C3 to a value in column I and return the corresponding record from column J. Please see this tutorial to learn more about VLOOKUP.

  36. What an awesome blog! great stuff here!
    I am trying to find a solution to a conditional formatting using a formula issue (I THINK!)...
    Please see image at: to see what I am hopeful of achieving.

    Thx!

    1. well - I tried to post a url in that...
      trying again here without the brackets
      sbonham.com/ganba/GymSheetMockup.jpg

      1. Thank you very much for your kind words, Steve, and thank you for the screenshot.

        I'm sorry, but there is no easy way to check several words that are in cell B3. One possible solution would be taking the key words into separate cells, selecting the range with comments, and creating a Conditional Formatting rule for each key word with the following type of formula:
        =SEARCH($B$3,E6)

        Here $B$3 is the cell with the key word and E6 is the first cell of your range with comments.

  37. Hi

    I want to format a series of cells 2*4 (represents 1 day)to green if the combined value is 0/blank.
    =SUM($B$6:$C$9)=0 goes for the same cells =$B$6:$C$9 so far no problem. But how do i autofill this formua over a sheet with hundreds of cells working 2*4.. Is it even possible or do i nedd macro?

    Thanks.

    /fred

    1. Hi Fred,

      Could you describe your data structure in more detail? Do you want to sum values in range B6:C9 and then B10:C13, or are 2*4 groups arranged in a different way?

      1. Thats correct, downwards would be B10:C13 an to the right D6:E9 and so on.. And if the sum of these 8 combined cells are 0/blank i want them all (ex. B6:C9) to be green, if the value is something else they should become white. All 8 of them. The formula above does this, but it wont autofill over the sheet like i want..

        1. Thank you for the details, Fred,

          Please select all your data and use the following formula for the Conditional Formatting rule:
          =SUM(INDIRECT( ADDRESS((INT((ROW()-2)/4)*4+2),(INT((COLUMN())/2)*2))&":"&ADDRESS((INT((ROW()-2)/4)*4+2+3),(INT((COLUMN())/2)*2+1)) ))=0

          You can read about the INDIRECT function in this blog post.

          Another way to go is use OFFSET function:
          =sum(OFFSET(INDIRECT(ADDRESS((INT((ROW()-2)/4)*4+2),(INT((COLUMN())/2)*2))), , , 4, 2))=0

          1. Sorry, i don´t get this.. Im about to give up on this.. Thanks anyway!

  38. So I am having a particular issue that this seem to be the closet I am getting. I have a column I am trying to get to fill with x color based on the rest of the row. simple enough I have found ways to do that even here with the search function. however even using conditional formatting it doesn't seem to work if its scanning in-cell drop down.

    so there is a header roll the I have names in the first column, second column for color indicator and then column 3:28 is for putting a checkmark or x. if the person knows that task listed at the columns header like forklift certified then john doe gets a ✓ and the status column with be green and a × would be red to indicate he is on restrictions and not perform one or all of his tasks.

    any thought that allow for later addition of employees without having to modify the function parameters?

    1. Hi Dear!

      you are always there like a teacher for me to learn new formulas and option in excel thank you so much dear.

  39. Hello,

    I am trying to create conditional formats that uses icons where I can say if the value is >30%, then green, between 30% and 29% is yellow, and less than 28% is red. Somehow, the yellow one is not yielding results. Also, is it possible to use the conditional format when the data is negative?

    Thanks a lot,

    Maud

    1. Hello Maud,

      Please try to use one of the following formulas for the rule that doesn't work, these examples assume that the numbers are in column A:
      =AND($A2>=29%,$A2<=30%)

      You can also try this one:
      =AND($K2-29%>=0)

      You can use negative numbers for conditional formatting as well.

  40. Hi,

    I'm looking for the formula for conditionally formatting in situation where we have 2-set of values.

    Let's say - If I've 50-locations actual sales Vs their INDIVIDUAL targets (Which are different for each location) and need to conditionally format RED/GREEN for their given achievements (Achieved : Yes = Green / No = Red)

    I need a versatile formula to set in entire column - I tried few options and it fails :(

    Please help - I appreciate it in advance

    Thanks and Regards

    1. Hello,

      If I understand your task correctly, you need to create two Conditional Formatting rules:
      1) One will highlight the locations Green if the value in the column with their "Actual sales" is equal to or more than the value in their "Individual target":
      =$B2>=$C2

      1) The other rule will highlight the locations Red if the value in the column with their "Actual sales" is less than the value in their "Individual target":
      =$B2<$C2 Please replace column B with the name of the column with actual sales, and column C with the name of the column with individual targets. I hope this helps.

  41. Hello,

    Is there a way to make the application of a formula in one cell conditional upon whether or not another cell is blank?

    E.g. If cell C1 contains a number, I want cell D1 to return the value of C1/366. If cell C1 is blank, I want cell D1 to be blank.

    At the moment, I have got to a stage where if cell C1 contains a number, D1 displays (in text) "=C1/366" and does not process the formula.

    1. Hi Josie,

      Sure, you need to use the IF function in D1:
      =IF(C1<>"",C1/366,"")

      It says if C1 is not empty, divide it by 366, otherwise leave the cell blank.

      I hope this helps.

  42. Hi,

    I need your help. I am using conditional formatting>New Rule>Format only cells that contains>specific text. formatting is working i am using colors in that red and green Green for with in limit and Red is for Breach. applied formatting works properly but actual problem is when i closed file after save next time that formatting removed.

    what is the reason behind why this happening? why that formatting not saved with that file ?

    can any body help me out please in this regard ?

  43. Hi, I need to highlight values on a spread sheet in column F if the value is bigger than the value in column D. How do I write the formula for the whole column without doing it one for one.

    1. Hi Willie,

      Just enter the dollar sign before the names of the columns in your formula, e.g.
      =$F2>$D2

      You also need to make sure "Applies to" range contains all records in column F, so when you click "Manage rules", you will see "=$F$2:$F$350" under "Applies to" if you have 350 rows.

      Let me know if you have any other questions.

  44. I am creating a large excel document that has information populating though it. If I have a cell on one page showing ten items, i would like on another page where it will populate over ten cells showing one item all with that same discription. is there a way to do this? I really need to! To explain further - on one page it is a quote which says 10 doors, on another page i want it to populate 1 door ten times where there will be further information added for an architect to review.

  45. namaste,

    Excel formulas for conditional formatting based on another cell value

    in that i need time conditional formatting
    my travel time stated time 7:00 i should reached 8:00if above 1 hour diff should be diff coloer

    Need you advice .

  46. HI, i need to put in a column:
    in green: different texts, aleatory
    in red: NO
    in yellow: DEF
    gray:nothing
    i already put red, yellows and gray conditions.
    so, for green: edit formating rule/format only cell contain/ not equal to/=AND("NO";"DEF")
    doont work, dont bring me anything in green.
    help¡?

    1. Hi Zak,

      Please include a cell reference into your formula:
      =AND($H2<>"NO",$H2<>"",$H2<>"DEF")

      I hope this helps.

  47. Hi,

    Svetlana,

    We need your help we want to use conditional formatting on a sheet 1 column A but references is on another sheet 2, If in Sheet 2 Column B Value is greater than Column A, than Sheet 1 Column A should be highlight reflect as color

    1. Hello,

      To compare values in different sheets, you need to include the name of the sheet to the cell reference, so your formula will look this way:
      =Sheet2!$B2>Sheet1!$A2

      Please also make sure you apply the rule to column A in Sheet 1.

  48. Hi Svetlana, Can I use conditional formatting on one sheet and monitor a cell on another sheet? So I want a cell on one sheet to change colors when the cell on another sheet has specific text or numbers.

    1. Hi Todd,

      Sure, you just need to add the name of the sheet to the reference in your formula, e.g. if you want to monitor the value in A2 in Sheet 2, here is how it should look:

      =Sheet2!$A$2="Value"

  49. Good afternoon,
    Can you please assist me with the following:

    If cell B4 contains the two letter code v6, reflect in
    cell R4: September 15th.

  50. If cell J8 value is 5 and cell K8 value is 2 and I want cell G8 to list the value from J8 when K8 is 2...how do I formulate that?

    1. Hello Todd,

      If you want to display the value from J8 when K8 is 2, then you need a simple IF statement in G8:
      =IF(K8=2,J8,"")

      If you want to get the value from J8 if both conditions are true: K8 contains 2 AND J8 contains 5, then you need the following formula in G8:
      =IF(AND(J8=5,K8=2),J8,"")

Post a comment



Thank you for your comment!
When posting a question, please be very clear and concise. This will help us provide a quick and relevant solution to
your query. We cannot guarantee that we will answer every question, but we'll do our best :)